A research team of Seoul National University led by Professor Kyu-Jin Cho has developed an origami-inspired robotic arm that is foldable, self-assembling and also highly-rigid

They developed a novel robotic arm using a concept of variable stiffness. The robotic arm made it possible to change the shape with a single wire, thus raising the possibility of practical use of the origami structure. The robotic arm is light-weighted, and can fold flat and extend like an automatic umbrella and even becomes instantly stiff.

“This robotic arm uses the variable stiffness technology which gains merits of both rigid and soft robots.”

The key principle is a collapsible locker and this enables the robotic arm to overcome the drawbacks of origami-inspired structures that is hard to withstand external forces and is hard to be easily actuated.

The variable stiffness mechanism is based on an origami principle of perpendicular folding; two perpendicular fold lines constrain each other’s movement. By using this principle, a hexagonal structure (40X40X100 mm) which weighs less than 30 g can withstand more than 12 kg of compressive load. On the other hand, the lockers can be easily unlocked and the structure is folded flat by pulling a single wire with a small force.

Inspired by the origami, the researchers have designed a flat, foldable, light-weighted, but highly stiff robotic arm that can be attached to UAVs © SNU

Benefits of the foldable robotic arm can be maximized when it is attached to drones where the weight and the size constraints are the most extreme. The drone unfolds the robotic arm, picks up an object in the ditch, and films the trees in one trial. When the robotic arm is not in use, it folds flat for convenient maneuvering, easy take-off and landing. The proposed variable stiffness mechanism can be applied to other types of robots and structures in extreme environments such as polar area, desert, underwater, and space.

Professor Cho said, “Soft robots have great advantages in their flexible movement, but they have a limitation in that they cannot support high load without deformation. This robotic arm uses the variable stiffness technology which gains merits of both rigid and soft robots. With this property, the robotic arm can be folded flat when not in use and can be stiff when necessary. In addition, the arm is made of composite of tough ripstop fabric and specially handled strong PET film for the practical use.”

Source: SNU

Related:

0 0 vote
Article Rating